Wooden Packaging

Custom Inserts & Compartments

Foam, velvet or wooden inserts that hold every component exactly in place.

The insert is the least visible part of the packaging and the one that decides whether the product arrives in one place. It also sets how the box is read on opening: tightly engineered reads precise, loosely fitted reads cheap.

We lay out the interior around every component that ships in the box — the product, its accessories, the cable, the manual — so each has its own position and nothing can migrate into the product during transit.

The brief behind it

An insert is a locating device

It helps to think of an insert as a locating device rather than as padding. Its job is to give every component a defined position and to prevent relative movement. Padding is what you add when the locating job has not been done properly.

Good inserts are designed from the component list. Each item gets a cavity sized to its outline plus removal clearance, and the cavities are arranged so that removing one item does not disturb the next. That is why the layout is drawn before the material is chosen.

Material then follows function. Foam gives the most control over cavities and is the standard for fragile items; moulded pulp is cheaper and more sustainable but less precise; wooden dividers give structure and a premium feel where the components are rigid.

What you can specify

Custom Inserts & Compartments — the decisions that matter

Every point below is developed with you and confirmed on a physical sample before production.

Insert materials

  • EVA and sponge foam cut to the product outline
  • Velvet, suede and fabric-covered platforms
  • Wooden dividers, cradles and removable trays
  • Moulded pulp for lower-cost protective blocking

Layout & function

  • Multi-component layouts for sets and kits
  • Finger notches and ribbon pulls for easy removal
  • Separate channels for product, accessories and literature
  • Tested for movement under the agreed shipping conditions

Assembly & cost

  • One-piece inserts versus layered construction
  • Cutting method chosen for the cavity geometry
  • Assembly time allowed for at the packing stage
  • Insert revised without changing the outer box

Not sure what to specify?

Send the product dimensions, an approximate quantity and the date you need it. We come back with structure, material and finish options — and a clear quotation.

Start a project

At a glance

Custom Inserts & Compartments — the specification sheet

The six decisions that define this product. Change one and the cost, weight and lead time move with it.

Component list
Every item that ships — product, cable, tool, booklet — gets a position.
Cavity tolerance
Snug enough to locate, loose enough to remove with fingers.
Material
EVA foam, covered foam, pulp or wood, chosen for fragility and cost.
Covering
Bare foam where cost dominates; velvet or fabric where presentation does.
Removal
Notches, ribbon pulls or lift-out trays so the product comes out cleanly.
Assembly
Layered or one-piece, with packing time reflected in the unit cost.

From our catalogue

Custom Inserts & Compartments — 10 pieces in stock design

Real pieces from our supplier catalogue. Click a photo to enlarge it; click a name to open the item. Your own version is developed to order around your product.

Why it matters

What an insert decides

These are the choices this page decides. Getting them right at the sampling stage is what keeps cost and rework out of production.

Discuss your project

In practice

  • Whether components can collide during transit
  • Whether the product is presented upright or heaped in a cavity
  • How long the packing step takes per unit
  • Whether the box can be reused with a different product later

Who buys this

Who needs custom inserts

The same product is specified very differently depending on who is buying it. These are the briefs we see most often.

  • Multi-piece product setsKits where several components ship together and must not touch.
  • Fragile & precision goodsItems that fail from a single impact or from surface contact.
  • ElectronicsDevices with cables, chargers and manuals that need ordered positions.
  • Beauty & gift setsBottles, jars and tools of different heights sharing one box.

How we run it

From brief to delivery

We are a sourcing and product development partner rather than a single factory. Your project is matched to a specialist workshop in our manufacturing network, and one team stays accountable for the drawing, the sample, the production schedule and the inspection before dispatch.

Brief & structural drawing

Your product, sketch or reference photo becomes a working drawing: internal dimensions, wall thickness, opening mechanism and insert layout, with the trade-offs priced.

Material & finish sample

Before a full sample is made, you compare species, stain and coating on physical boards under your own lighting — the fastest way to avoid a colour surprise.

Pre-production sample

A physical sample of the actual construction is made and shipped for approval. Nothing goes into a production run before you sign off on it.

Production at a matched workshop

The approved sample becomes the standard. We coordinate the schedule with the workshop best suited to the structure, material and quantity, and report progress.

Inspection & packing

Units are checked against the approved sample during and after production — dimensions, finish, hardware and branding — then packed for the shipping route.

Shipping & documentation

Export cartons, packing lists and shipping documents are prepared against the agreed trade term, and the shipment is coordinated with your forwarder or delivered to the named port.

Common questions

Questions we get about custom inserts & compartments

Will foam inserts look cheap?

Bare foam can, which is why it is usually covered with velvet or fabric. A covered EVA insert reads as precise engineering rather than as packing material.

Can the insert be removed and reused?

Yes — removable trays and lift-out inserts are a common request, especially where the box will be kept and reused for storage.

How do you make sure nothing moves in transit?

The insert is designed against the product and then checked with the product in place. Where the route is known to be rough, we add secondary blocking under the insert.

Can the insert be changed without changing the box?

Usually yes. The outer case is the expensive part; a new insert layout can carry a new product or assortment without new wood tooling.

Is there a sustainable alternative to foam?

Yes — moulded pulp, board-based cradles and fabric-wrapped inserts. Each trades precision or cost against material, so we quote them alongside foam.

How much clearance should a cavity have?

Enough to remove the product with fingers, not so much that it moves. For small items that is a couple of millimetres; for heavy items the insert should locate, not just surround.

Can the insert hold printed literature?

Yes. A dedicated flat pocket under the product or in the lid keeps cards and booklets from curling or marking the product.

Does the insert affect the box height?

Yes. Insert thickness adds to the internal height, which is why the insert layout and the box drawing are done together.

Related

Also worth looking at

Interior Compartments & Inserts — illustrative product photo

Interior Compartments & Inserts

The inside is where the product is actually judged — and where transit damage is prevented.

Read more
Premium Product Packaging — illustrative product photo

Premium Product Packaging

Outer packaging engineered to your product's dimensions, weight and fragility.

Read more
Wooden Presentation Boxes — illustrative product photo

Wooden Presentation Boxes

Showcase-grade boxes engineered so the product lands the moment the lid opens.

Read more

Back to the range

Tell us what you're making

Send the brief — we'll come back with structure, material and finish options for custom inserts & compartments, plus a clear quotation.