Custom Solutions

Hardware & Accessories

Small metal parts decide how the box feels to open — and whether it stays closed in transit.

Hardware is where a box reveals its price point faster than anywhere else. A cheap hinge rattles and drifts; a well-matched one lets the lid settle with a controlled stop. Magnets give a clean, hardware-free look but demand tighter tolerances in the wood.

We match the fitting to the structure rather than adding it afterwards: a hinged lid needs stops, a sliding lid needs a finger pull, a travel case needs a latch that will not open in a bag.

The brief behind it

Hardware is a feel decision

No other component changes how a box feels as much for as little material cost. A hinge with a stop makes the lid settle; a hinge without one lets it fall back. A magnet closure gives a soft, precise close; a loose hasp rattles.

The engineering constraint is tolerance. Magnets and concealed hinges need the wood to hold a tight dimension, which is more expensive to make consistently than a surface-mounted hinge. Choosing a hidden fitting is therefore also choosing a higher manufacturing standard.

The third consideration is the journey. Anything that will travel in a bag or a parcel needs a closure that cannot open accidentally, which usually means a mechanical latch rather than a magnet.

What you can specify

Hardware & Accessories — the decisions that matter

Every point below is developed with you and confirmed on a physical sample before production.

Closures & hinges

  • Butt, concealed and piano hinges
  • Hidden magnet closures for a clean exterior
  • Hasps, buckles, clasps and small locks
  • Ribbon ties and leather straps

Handling & protection

  • Brass, antique, nickel and matte metal finishes
  • Handles, pulls and finger notches
  • Feet, corner protectors and edge trims
  • Rivets and fixings matched to the hardware finish

Selection rules

  • Match the fitting to the lid weight, not to the box size
  • Choose a closure that cannot open accidentally if it travels
  • Specify removable fixings where the box will be serviced or reused
  • Keep one hardware family across a range so it reads as a system

Not sure what to specify?

Send the product dimensions, an approximate quantity and the date you need it. We come back with structure, material and finish options — and a clear quotation.

Start a project

At a glance

Fittings at a glance

What each fitting does, and when it earns its cost.

Butt hinge
Simple, visible, cheap. Fine for utility boxes; not for premium presentation.
Concealed hinge
Hidden from outside, gives a clean lid. Needs tighter wood tolerances.
Magnet closure
Clean exterior and a precise close. Limited lid size and weight.
Hasps & latches
Secure closure for travel and shipping; visible and mechanical.
Handles & pulls
For boxes that get carried; also a strong visual signal of purpose.
Feet & corners
Protect the box and the surface it sits on; often the first part to wear.

Why it matters

What hardware changes

These are the choices this page decides. Getting them right at the sampling stage is what keeps cost and rework out of production.

Discuss your project

In practice

  • How the lid opens and whether it stays open
  • Whether the box can be locked or travels securely
  • How much the box weighs and how it balances
  • How the metal finish relates to the brand's palette

Who buys this

Who this decision matters most to

The same product is specified very differently depending on who is buying it. These are the briefs we see most often.

  • Premium presentation brandsThe opening is the brand moment and hardware is what makes it feel controlled.
  • Travel & instrument casesThe closure has to be secure, not just attractive.
  • Furniture-adjacent productsHardware is expected to match the material palette of the surrounding object.
  • Service & repair programmesRemovable fixings let a case be maintained rather than replaced.

Common questions

Questions we get about hardware & accessories

Will magnets hold a heavy lid?

Up to a point, and the tolerance of the wood matters as much as the magnet strength. For larger or heavier lids we recommend a mechanical hinge with a magnet as secondary closure.

Can hardware be replaced later?

If it is screwed rather than riveted, yes. Where long service life is expected — display fixtures, reusable cases — we specify removable fixings.

Does hardware have to match across a range?

It usually should. Using one hardware family across boxes, trays and fixtures keeps a range reading as one system, and it simplifies spare-part handling.

Can we supply our own hardware?

Sometimes. It has to be tested against the lid weight and the wood thickness, and it becomes your responsibility for availability — but it is possible and we will advise.

Why does our hinge loosen after a few months?

Usually the screw holding in a soft wood, or a hinge rated below the lid weight. Inserts, thicker walls or a different hinge solve it; retightening does not.

Do we need a lock?

Only if the box travels or contains something valuable. A lock adds cost and weight, and it changes the visual language of the product.

Is brass better than nickel?

Neither — they read differently. Brass warms with age and suits traditional products; nickel stays bright and suits modern ones. We sample both against the wood.

Related

Also worth looking at

Size & Structure — illustrative product photo

Size & Structure

How the box opens and how it is built — the two decisions that constrain everything else.

Read more
Interior Compartments & Inserts — illustrative product photo

Interior Compartments & Inserts

The inside is where the product is actually judged — and where transit damage is prevented.

Read more
Wooden Watch Boxes — illustrative product photo

Wooden Watch Boxes

Watch boxes and roll cases with cushions that protect the piece and present the brand.

Read more

Back to the range

Tell us what you're making

Send the brief — we'll come back with structure, material and finish options for hardware & accessories, plus a clear quotation.